I call for to start a drag truck project but I don't want to race a long bed, can you bolt on a short bed with little or no lie? do you have to shorten the frame? Does it even make a difference?
You can prune the frame, make sure to get it square and plate inside the rails where you splice it. A shortbed is a little lighter and may have measure better traction.
What kinda question is that? | Sep 05, 2009
"can you shoot off on a short bed with little or no fabrication?" You don't have to shorten the frame, but it would look odd if you didn't. Lots of absolute frame before and behind the short box. Along with the frame, you will also need a shorter drive shaft, brake lines, incite lines, wires, exhaust, etc. As a drag truck, most of this will be custom work anyway so it doesn't matter. Be sure to have attribute work done if you have the frame shortened. You will have to pass a tech inspection before you can race.
Sep 05, 2009 by Brandon Z | Posted in Maintenance & Repairs
I have a 1996 Chevy 1500 wish bed pickup. It has the 4.3L Vortec engine, Auto Zone loaned me a scanner to hook up to the module under the hurry, and it said cylinder 6 misfiring detected. I popped the hood, and looked at cylinder 6, and pulled the wire out, and the boot and wire illogical from eachother. So, I went back to out to Auto Zone, got a new wire set, and plugged it up. It's still misfiring. I pulled the wire off the clog, to see if I was getting spark. I was, and then I took the plug out, to see if I was getting spark from both, and I was. It was not wet, nor did it have any type of condensation on it whatsoever.
I had bewitched the intake manifold off to fix an engine coolant leak that was coming from a bad intake gasket. So I had to disconnect EVERYTHING, raze the distributor out, and I put everything back on. Changed the oil, put more engine coolant in it. It should be running fine. Anyone have the first clue why it's giving me so much shit?
I own a 1997 chevy x-cab impolite bed p/u with a 305 engine.I recently did a tune up on the truck which consisted of plugs, wires, cap, rotor, and fuel sieve. While tightening the cap down one of the bolts broke so I had to remove the distributor and tap the hole. I marked the fire wall and removed the distributor, and reinstalled it with the rotor pointing at the smear. Here's the problem, the truck is surging while driving. I was going to set the timing with a light but can not locate the tab with the degree marks, but can hit upon the groove on the balancer. Can this truck be timed manually or do I need to take it to a shop with a computer. Can any body help. THANK YOU
Sep 03, 2009 by RichieD | Posted in Maintenance & Repairs
i be to ask if its easy to make a flat bed out of 2x6 and 4x4 post but the thing is my gas tank is in the bed of the truck now what should i do to fix this can i mount it back under the chassis
Sep 02, 2009 by Forrest | Posted in Other - Cars & Transportation
I've been doing modifications to my 09 Chevy 1500 Texas issue crew cab, chromed out (black). I found a good bar to put up on the bed side to have the lights above the cab, but I'm stuck on what kind? I'm looking for Super Quick-witted, great for off-road, I need to see as much and as far as i can while im out in open land, and while im going through the brush and trails. Any suggestions? I will be needing 4 lights. If you have any additional things to share that you weigh would "look good" for this truck, please share :) im on a shopping spree for parts.
1955 Chevy Truck Bed Build
Installing the bed wood and bed sides on to a 1955 second series Chevy truck shortbed stepside.
Firefighters Come To SCC To Hone Skills
21.05.12
If you smelled or saw smoke billowing up from North Mankato this weekend there was no danger. In fact, quite the opposite, over 800 firefighters from around southern Minnesota were in town to hone their fire fighting skills.
Being a firefighter takes heart, strength, bravery...and just as important, training.
Training Instructor Troy Walsh says, "When it comes to those stressful situation that people are not born and bread for they are trained to become those people, and the more we train the better we are at it and the more things we can do to have a positive outcome for the public."
Top custom chevy trucks. When it comes to buying truck caps you can trust one name Leer. This is a popular company manufacturing this product along with many others such as truck canopies toppers bed
Jun 05, 2011 from baddbrainz(Badd Brainz) in Lifestyle
The Bremach T-Rex certainly looks like a serious truck, but it takes more than looks to convince us that the all-electric Bremach is able to stand up to the gas-powered Ford Super Dutys and Chevy Silverado HDs of the world. Bremach certainly has the pedigree to back up the T-Rex's work truck claims.
The Juárez police alleged that these gang members were caught stealing cars (which, many times, are then used in drive-by shootings). After being cuffed, they were hogtied facedown in a truck bed...
The winners for the North American Car and Truck of the Year have been announced, at the 2011 Detroit auto show--and they are the 2011 Chevrolet Volt and the 2011 Ford Explorer.
The Chevy Truck - An American Model of Quality Enduring To This ...
by Larry Thomas
Ungiving guys do not covet a pick-up ridiculous. They require a truck mystifying that can take on rough roads boonies offal. With its portion solidly built truck, the Silverado is a plain determination. It said that Chevrolet owners are so afraid of the durability of their trucks, their Chevy truck will be a superlative legacy for generations to expect satisfactory. Chevrolet trucks are more persistent and included an encyclopedic assortment of features to modify b transfer the director of the company. Silverado dynamic 6.6L diesel V8Turbo with six bolts automated delivery can take care of all the rough roads or territory while also offering a free tool along the highway.
Changes in trade truck uses a new type of truck known as the SUT, ridicule Utility Truck. Basically, all it is is an SUV with a truck bed in a word. In this market, the Chevrolet Avalanche is the preferred reply. What sports enthusiasts trucks zeal is that it's so adaptable. More striking is the innovative system to reshape the truck bed longer.What happens is that the seat bottom out of business down, hold up beaker removed and the system partition down. Essentially, it turns from a cabin of the party to make a long story short for a double bed nostalgic pickup bed covers. As you've dropped the partition, the enrage removable failure that separates the box from the bed, you find that a lot of respect for storage. You might even have a Zizz there if you needed. Talk about a truck bed! For this act, you will establish that the Avalanche is unconditionally one outside your instrument lights to take you to scratch mom door.Mountaineers does it delight because they can put two tents in the box without having to fire a bad tent camping ground....
Strong Men Love Chevrolet Pickup-trucks For More Than One Reason ...
by Abel Rodriguez
Chevrolet states in its latest advertising campaigns that it is “A Legacy Built On Dependability.” This is so sincere when you examine the Chevy truck. In 2008, Chevy introduced three new truck models to the domain. The 3 models: Silverado, Avalanche and Colorado, have each in its own pedigree shared the division of being the top-dog. Toughness is a big part of that. Stoppage out Chevy auto parts online to see what is ready.
Silverado’s in ruins-telling chassis makes it a favorite alternative of power hooligan guys. When you have to roam the bumpiest soil roads in America with a unrestrained b generally heap in the bed, you yen something that can get the job done. Chevy owners are the most assured and happiness truck owners in the community. This Chevy truck is brim-full with peerless features such as costly seats, power steering, and a immense towing potential. With the technology under the hood to construct it the energy commander, the Silverado’s persuasive 6.6L V8 Turbo diesel can clearly drag the biggest loads in rough-and-tumble landscape or miles down the longest interstate highway. Goods handling in extended cab models is made easy with bum cab doors having 170-limit access.
Better Days Old Chevy pickup truck Painting. Antique automobile red white and rusted short bed antique vintage vehicle truck transportation chevrolet southwestern road americana historical west illustration watercolor painting and pen and ink drawing.
Price: $38.50
What's hot
Dee Zee DZ86973 Heavyweight Bed Mat Automotive Parts and Accessories (Dee Zee)
List Price: $78.25 Price: $62.86 You Save:$15.39 (20%)
Helps Prevent Cargo From Shifting & Damaging Your Truck Bed
Highly Compressed Rubber Resists Abrasions, Tears, Cracking and Fuel Spills
Rubber Material Deflects UV Rays To Reduce Fading
Truck Media
Picked up by AAA, who towed my Volvo with it's mystery stall (can't repeat for the mechanic) earlier this week.
The gold star with brass filigree goes to whoever can remember the entertainer whose catchphrase that was. Aside from my grandfather who said it whenever he drove somewhere. Obfuscation: I'm 38 and I remember.
This is the bed of a work truck I encountered while walking through town. I'm sure everyone has seen one, but how often to you find them without a single thing being carried.
Photographed at the Cool Cruisers Car Club Cruise-In held in Springfield, Illinois on July 27, 2010.
You are invited to stay and browse through my stream. Here's a quick...
Twitter
Oct 06, 2011 from tonasanderford
#Chevy #Truck #Bed We Got Cheapest In Chevy Truck Bed Cover. Find Great Deals and Low Prices Che
Oct 05, 2011 from Carson boles
Lots of mods done to the truck lately...new stereo, new speakers, blacked out chevy emblem, bed lined tow hooks and plasti dipped side rails
Oct 05, 2011 from cars in atlanta
ACURA: 1994 94 chevy chevrolet 2500 truck (lovejoy) $1: 1994 2500 std. cab long bed 2 wheel drive c...
Oct 05, 2011 from CraigsCarf
1982 CHEVY 1-TON (SW,MO) $1300: GOOD WORK TRUCK. EXTRA LONG FLAT BED, STANDARD,
PLEASE CALL OR TEXT 417-355-017...